CADIS roll over wash unit - The next generation of CAR WASH is now

Our in 2019 successfully launched CADIS wash system, will be even more attraktive than ever from 22 September 2020

As a new special feature, the BLADEs are available in an illuminated version.

In the basic equipped version, BLADE is unlighted and has a colour strip in one of the available Christ accent colours.

In the PREMIUM equipped version, BLADE has a through-coloured front panel in one of the desired accent colours. Powerful LEDs backlight the BLADEs and let the BLADEs shine. The wash system will be an eye-catcher and draws attention at dawn or darkness.

In the PREMIUM PLUS equipped version, BLADE can be colour-switched in WHITE, RED, YELLOW, GREEN, BLUE.  This means you can highlight with different colours, e.g. the wash phases in the wash programme sequence. More show for an outstanding client experience.

For the TOUCH POS operating device, an illuminated supporting foot in BLADE form is now available. In combination with the RGB wheel guiding tubes, CADIS becomes the central eye-catcher for petrol station customers. The lighting effects of the wash system ensure increased attention and attract customers wanting to use the professional car wash system. 

With the new CADIS model, Otto Christ AG presents as an innovation leader, a technically and optically completely new developed roll over wash system model.

Two years ago the go-ahead was given for the development of the new generation. This machine series meets the future requirements of car wash at petrol stations, car dealerships and wash centres.

The requirements of the respective operator groups differ considerably. The different customer needs of global car wash markets also vary greatly.

It became soon clear to us that the new machine series had to be adaptable to customer requirements with a variable modular system.

The name CADIS symbolizes a pioneering sparkling star. And exactly this requirement is fulfilled by the roll over wash unit CADIS. The wash and drying performance as well as the gloss level achieved with short programme run times is outstanding.

 

With this latest evolutionary stage of CADIS, Otto Christ AG has not only developed a visionary new system for the previously successful roll over wash system generation, but has also technologically implemented the future standard in the field of roll over wash system technology.
CADIS meets the future requirements according to the new Christ standard "LEHP"!
Low Emission & High Performance are combined in this unique machine design.

The SILENT-drying system convinces with lowest noise emission and maximum blower power.
The machine hides a lot of highlights under the body according to the motto - More than CAR WASH - More than PERFORMANCE - it gets even better!

All processes are smooth, fast and very quiet. Installations in urban areas with strict emission regulations as well as outdoor installation are easily possible with CADIS.
The focus of development continued to be on ensuring that the roll over wash unit was manufactured to the highest quality standards. Longevity, reliability and low maintenance costs and energy consumption are the keywords that CADIS brilliantly meets.
In addition, the superior appearance of the machine also convinces the end consumer and creates valuable trust.

The memorable machine design with recognition factor presents the car wash in a modern and fresh way and also blends into the modern architecture of the buildings of petrol stations, car dealerships and wash centres.
A clear, modern and simple user guidance in the new TOUCH POS control unit with 10 inch monitor convinces by the newly developed user interface. All generations understand the operating possibilities without the need for additional information. Old inhibitions during operation are eliminated. It is simple and fun.

The TOUCH POS operator terminal can be expanded from a pin code and transponder cards to a VENDOR payment system with credit card function thanks to a wide range of options.

Basic versions:
Passage heights:                                      2,10 m - 3,10 m
Passage widths / window zone:               2,55 m | 2,70 m
Outer dimensions:                                    3,52 m | 3,67 m
Wheel guiding pipes:                                2,10 m

Quality:
Portal frame:                                             Hot dip galvanized | DUPLEX powder coated
Add-on pieces:                                          Stainless steel | plastic | aluminium alloys

Enlarged roof blower XL
Enlarged projection on the horizontal vehicle surfaces for seamless transition into the effective area of the side fan

Swivelling roof blower
Efficient, fast and contour following drying, for an ideal drying angle of 30° in the tail area

SILENT-drying system
Low noise emissions for installation in urban areas or outdoors.

Large wheel washer XL
Enlarged wheel washer disc for optimum coverage of all vehicle classes.

VITESSE function
Shortened programme runtimes and higher throughput during peak periods. The high-pressure pre wash is carried out parallel to the cylinder wash

Large VISUS RGB display
Digital user-friendly operator guidance for simple and clear customer communication

OPTIFLEX lateral brush system
Optimum contour detection of the vehicle surfaces due to pneumatically controlled lateral brush system inclination.

Machine self-test
This automatic diagnostic programme checks all important machine functions directly after switching on.

For maximum system performance of the CADIS, the chemical work materials of the CHRIST CAR CARE are recommended.

FOAM REX                          Insect remover
RIM REX                              Rim chemistry
TWIN FOAM                        Active foam
BLASTER                            Shampoo
ALPINE WAX                      Foam wax
PROTECT SHINE               Polish

All chemical products, as well as the articles in the Christ Xpress accessories catalogue, can be conveniently ordered via the Christ Online Shop.
Quick delivery is a matter of course.

After installation Christ customers benefit from the comprehensive customer and chemical customer service.


The main factory in Benningen and the two service branches in Berlin and Düsseldorf always ensure maximum machine availability.

Another shining innovation from Christ!
More than CAR WASH!

Have fun at the car wash!

Stefan Schwaerzer
Sales manager of the segment roll over wash unit

Memmingen 02 September 2020

Otto Christ AG - The Real Car Wash Factory

Domestic, export product enquiries:
Phone +49 (0) 83 31 857- 200, sales@christ-ag.com (International)
Phone +49 (0) 83 31 857-100, verkauf@christ-ag.com (Germany)
Fax + 49  (0) 83 31  857-185

Car Care division:
Phone +49 (0) 83 31 857-4880, chemie@christ-ag.com
Fax +49 (0) 83 31 857-4888

Request Xpress catalogue:
Phone  +49 (0) 83 31 857-394, bestellung@christ-carwash-shop.de
Fax +49 (0) 83 31 857-495

Press:
Phone + 49 (0) 8331 857-180, mwoerle@christ-ag.com